www.vishay.com 107 CSD vishay thin film document number: 60046 revision 27-apr-01 through hole vishay thin film ? france +33.4.93.37.28.24 fax: +33.4.93.37.27.31 ? germany +49.9287.710 fax: +49 9287.70435 ? israel +972.3. 557.0945 fax: +972.3.558.9121 ? italy + 39.2.300.11919 fax: +39.2.300.11999 ? japan +81.42.729.0661 fax: +81.42.729.3400 ? singapore +65.788.6668 fax: +65. 788.0988 ? sweden +46.8.594.70590 fax: +46.8.594.70581 ? uk +44 191 514 8237 fax: +44 1953 457 722 ? usa: (610) 407-4800 fax: (610) 640 -9081 features ? gold-to-gold terminations. external leads are attached directly to gold pads on the ceramic substrate by thermo- compression bonding (no internal solder). ? monolithic construction ? ceramic package with no cavity. 4 to 20 pins ? flexibility of lead variations to save pc board space. ceramic sandwich, dual-in-line, resistor network (custom) schematic test specifications conditions material tamelox , tantalum nitride* tcr: tracking 2ppm/ c 5ppm/ c - 55 c to + 125 c absolute 10ppm/ c 25ppm to 100ppm - 55 c to + 125 c tolerance: ratio 0.01% to 0.1% 0.01% to 0.1% + 25 c absolute 0.1% to 1% + 25 c power rating: resistor 100mw per element typical max. at + 70 c package 500mw max. at + 70 c stability: ? r absolute 1000ppm 2000 hrs. @ + 70 c ? r ratio 300ppm 2000 hrs. @ + 70 c voltage coefficient 0.1ppm/volt working voltage 100 volts operating temperature range - 55 c to + 125 c storage temperature range - 55 c to + 125 c noise < - 30db thermal emf < 0.1 v/ c shelf life stability: absolute 100ppm 1 year @ + 25 ratio 20ppm 1 year @ + 25 a dual-in-line monolithic ceramic package in a variety of sizes and configurations. a rugged, low cost packaging technique with 4 C 20 leads that allows higher resistance integration than chip and wire ceramic packages. * tantalum nitride film is custom. standard electrical specifications abs tracking tcr 10 2 abs ratio tol 0.1 0.02 typical performance custom schematics available. please consult factory
document number: 60046 revision 27-apr-01 www.vishay.com 108 CSD vishay thin film through hole vishay thin film ? france +33.4.93.37.28.24 fax: +33.4.93.37.27.31 ? germany +49.9287.710 fax: +49 9287.70435 ? israel +972.3. 557.0945 fax: +972.3.558.9121 ? italy + 39.2.300.11919 fax: +39.2.300.11999 ? japan +81.42.729.0661 fax: +81.42.729.3400 ? singapore +65.788.6668 fax: +65. 788.0988 ? sweden +46.8.594.70590 fax: +46.8.594.70581 ? uk +44 191 514 8237 fax: +44 1953 457 722 ? usa: (610) 407-4800 fax: (610) 640 -9081 dimension inches millimeters a 0.260 max. 6.61 c 0.160 typical 4.06 e 0.125 3.18 g 0.01 0.254 i 0.100 2.54 number length (inches) length of pins ??dimension (millimeters) 4 0.220 5.59 6 0.320 8.13 8 0.420 10.67 10 0.520 13.21 12 0.620 15.75 14 0.720 18.29 16 0.820 20.83 18 0.920 23.37 20 1.020 25.91 dimensions in inches and millimeters b e d j a c l f g i non-cumulative h part no. vishay logo date code xxxx xx pin 1 resistive material tamelox ? or tantalum nitride substrate material alumina body ceramic terminals copper alloy #42 plating gold marking resistance to solvents per mil-prf-83401 ceramic sandwich, dual-in-line, resistor network (custom) dimension inches millimeters b 0.050 1.27 d 0.080 2.03 f 0.125 min. 3.18 h 0.325 8.25 . j 0.020 0.51 standard electrical specifications how to order check list special requirements should be identified in advance, but as a minimum, you should have the following information ready. electrical 1. resistors, by value and tolerance. 2. reference resistor(s) and matching of which resistors to which reference resistors. 3. resistance by ratio. 4. absolute temperature coefficient of resistivity. 5. temperature tracking of subordinate resistors to reference resistor(s). 6. maximum operating voltage. 7. resistor power ratings. 8. operating temperature range. mechanical 1. maximum allowable seated height (from pc board to top of network). 2. special marking concerns. 3. schematic pin out of package.
|
